Scholarlink

<p>All-solid-state lithium metal batteries (ASSLMB) are emerging technologies that have gained significant attention due to their potential to revolutionize energy storage systems. Replacing traditional organic liquid electrolytes by solid-state electrolytes can resolve serious safety concerns, chemical/electrochemical instability leading to dendrite formation and short cycle life of lithium-metal batteries. In this work, gel polymer electrolytes (GPEs) were successfully fabricated by using poly(vinylidene fluoride-<i>co</i>-hexafluoropropylene) (PVdF−HFP) mixing with lithium nitrate (LiNO<sub>3</sub>) and poly(ethylene glycol) dimethyl ether (PEGDME). Specifically, the obtained GPEs were thermal stable up to 200&#xa0;°C and electrochemical stable up to 4.5&#xa0;V. The GPE with ethylene oxide (EO): Li = 40:1 demonstrated an ionic conductivity ~ 1.50 × 10<sup>−5</sup> S cm<sup>−1</sup> at 30&#xa0;°C, which is considered suitable for the cell’s performance at this temperature. Indeed, all solid-state Li||LiFePO<sub>4</sub> using this GPE displayed good cycling performance at various rates, typically its retention capacity after 50 cycles at the current density of C/10 was 85% at 30&#xa0;°C.</p> Graphical abstract <p></p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Gel polymer electrolyte based on PVdF-HFP/PEGDME/LiNO3 for stable solid-state lithium metal batteries at room temperature

  • 期刊论文

  • 发表日期：

    2025年9月18日

查看全文
  • Linh Khanh Hoang,
  • Trung Thien Nguyen,
  • Liem Thanh Pham,
  • Manh Dang Le,
  • Ngan Hue Dai,
  • Man Van Tran,
  • Phung My Loan Le

摘要

All-solid-state lithium metal batteries (ASSLMB) are emerging technologies that have gained significant attention due to their potential to revolutionize energy storage systems. Replacing traditional organic liquid electrolytes by solid-state electrolytes can resolve serious safety concerns, chemical/electrochemical instability leading to dendrite formation and short cycle life of lithium-metal batteries. In this work, gel polymer electrolytes (GPEs) were successfully fabricated by using poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF−HFP) mixing with lithium nitrate (LiNO3) and poly(ethylene glycol) dimethyl ether (PEGDME). Specifically, the obtained GPEs were thermal stable up to 200 °C and electrochemical stable up to 4.5 V. The GPE with ethylene oxide (EO): Li = 40:1 demonstrated an ionic conductivity ~ 1.50 × 10−5 S cm−1 at 30 °C, which is considered suitable for the cell’s performance at this temperature. Indeed, all solid-state Li||LiFePO4 using this GPE displayed good cycling performance at various rates, typically its retention capacity after 50 cycles at the current density of C/10 was 85% at 30 °C.

Graphical abstract