Scholarlink

<p>In this research, laccase was immobilized on electrospun nanofibrous matrix composed of poly(vinyl alcohol) and xanthan gum (PVA/XG) using a two-step process involving physical adsorption and subsequent cross-linking with glutaraldehyde. Several key immobilization parameters, including enzyme concentration, nanofiber content, adsorption duration, and cross-linker concentration, were systematically optimized to enhance catalytic performance. Under optimal conditions, the immobilized laccase displayed a specific activity of 59.47 ± 1.29 U/g and an immobilization efficiency of 49.44 ± 1.57. tructural and morphological analyses (FTIR, DSC, TGA, and SEM) confirmed the successful incorporation of the enzyme into the nanofibrous matrix. Morphological evaluation revealed reduced porosity, increased fiber diameter, and expanded surface area following immobilization. Compared to the free enzyme, the immobilized laccase exhibited a shift in optimum pH from 4.5 to 5.5 and a broadened optimum temperature range from 35&#xa0;°C to 35–45&#xa0;°C. Kinetic analysis revealed moderate increases in <i>K</i><sub>m</sub> and slight decreases in <i>V</i><sub>max</sub>, indicating partial diffusion limitations while maintaining catalytic function. Furthermore, the immobilized enzyme retained more than 50% of its initial activity after 20 reuse cycles and demonstrated stable storage performance at both 4&#xa0;°C and 25&#xa0;°C. The system effectively degraded phenol and related compounds (up to 100&#xa0;mg/L), with phenol showing the highest degradation rate. These findings highlight the potential of the PVA/XG nanofibrous platform as a robust medium for enzyme immobilization in environmental bioremediation applications.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Biocatalytic degradation of hazardous phenolic compounds using laccase immobilized on electrospun PVA/XG nanofibrous matrix

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年1月19日

查看全文
  • Özgün Vatansever,
  • Ceyhun Işık,
  • Mustafa Teke

摘要

In this research, laccase was immobilized on electrospun nanofibrous matrix composed of poly(vinyl alcohol) and xanthan gum (PVA/XG) using a two-step process involving physical adsorption and subsequent cross-linking with glutaraldehyde. Several key immobilization parameters, including enzyme concentration, nanofiber content, adsorption duration, and cross-linker concentration, were systematically optimized to enhance catalytic performance. Under optimal conditions, the immobilized laccase displayed a specific activity of 59.47 ± 1.29 U/g and an immobilization efficiency of 49.44 ± 1.57. tructural and morphological analyses (FTIR, DSC, TGA, and SEM) confirmed the successful incorporation of the enzyme into the nanofibrous matrix. Morphological evaluation revealed reduced porosity, increased fiber diameter, and expanded surface area following immobilization. Compared to the free enzyme, the immobilized laccase exhibited a shift in optimum pH from 4.5 to 5.5 and a broadened optimum temperature range from 35 °C to 35–45 °C. Kinetic analysis revealed moderate increases in Km and slight decreases in Vmax, indicating partial diffusion limitations while maintaining catalytic function. Furthermore, the immobilized enzyme retained more than 50% of its initial activity after 20 reuse cycles and demonstrated stable storage performance at both 4 °C and 25 °C. The system effectively degraded phenol and related compounds (up to 100 mg/L), with phenol showing the highest degradation rate. These findings highlight the potential of the PVA/XG nanofibrous platform as a robust medium for enzyme immobilization in environmental bioremediation applications.