Scholarlink

<p>With the mass production and use of plastic products, Microplastic (MP) pollution is worsening due to widespread plastic use. Urban wastewater treatment plants (WWTPs) fail to fully remove MPs, making their effluents a key source of aquatic MP pollution. This study compared MP removal efficiencies across four Kunming WWTPs using different processes (AAO-V, BIOCOS-D, AAO-MBR, AAO-D filters) to identify optimal treatments for future plants. Removal efficiencies ranked: AAO-MBR (99.9%) &gt; BIOCOS-D (96.1%) &gt; AAO-D (92.1%) &gt; AAO-V (88.6%). AAO-MBR showed the highest efficiency, with biofilm filtration and adsorption as the main removal mechanisms. Future WWTP design should prioritize high MP removal efficiency alongside nitrogen and phosphorus removal, with AAO-MBR recommended as the optimal process. The removal rate of MPs should be properly considered along with those of nitrogen and phosphorus when developing future wastewater plants, and processes with high MP removal rates should be selected when possible.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Microplastic Removal Efficiency of Four Wastewater Treatment Processes in Kunming: Mechanisms and Optimal Process Selection

  • 期刊论文

  • 发表日期：

    2025年10月17日

查看全文
  • Zhineng Xiao,
  • Yuan Feng,
  • Hui Qian,
  • Shiyu Li,
  • Hailong Yu

摘要

With the mass production and use of plastic products, Microplastic (MP) pollution is worsening due to widespread plastic use. Urban wastewater treatment plants (WWTPs) fail to fully remove MPs, making their effluents a key source of aquatic MP pollution. This study compared MP removal efficiencies across four Kunming WWTPs using different processes (AAO-V, BIOCOS-D, AAO-MBR, AAO-D filters) to identify optimal treatments for future plants. Removal efficiencies ranked: AAO-MBR (99.9%) > BIOCOS-D (96.1%) > AAO-D (92.1%) > AAO-V (88.6%). AAO-MBR showed the highest efficiency, with biofilm filtration and adsorption as the main removal mechanisms. Future WWTP design should prioritize high MP removal efficiency alongside nitrogen and phosphorus removal, with AAO-MBR recommended as the optimal process. The removal rate of MPs should be properly considered along with those of nitrogen and phosphorus when developing future wastewater plants, and processes with high MP removal rates should be selected when possible.