Scholarlink

<p>When a loaded piece of wood is exposed to variable climatic conditions, the stress state depends on both the stress and moisture content change history due to the memory creep. To explore this complex time-dependent interaction, a new experimental device has been developed. Called the "fork" device, this simple setup allows the evolution of the memory creep of twin wood samples to be determined continuously under different loads. In this work, this device has been used at low temperature (i.e. 30&#xa0;<InlineEquation ID="IEq1"> <InlineMediaObject> <ImageObject Color="BlackWhite" FileRef="226_2024_1606_Article_IEq1.gif" Format="GIF" Height="7" Rendition="HTML" Resolution="72" Type="Linedraw" Width="9" /> </InlineMediaObject> <EquationSource Format="TEX">\(^{\circ }\)</EquationSource> <EquationSource Format="MATHML"><math> <mmultiscripts> <mrow /> <mrow /> <mo>∘</mo> </mmultiscripts> </math></EquationSource> </InlineEquation>C) and with six different humidity cycles to focus on the mechanosorptive part of the memory creep. The test was performed with thin quartersawn and flatsawn samples of beech and oak originally at green state. periods were chosen to obtain a moisture content quickly close to the equilibrium moisture content for each plateau. With negligible moisture gradient, the dynamics of mechanosorption was measured and compared with moisture variations, species and load direction. The results highlight an increase in mechanosorptive strain with cumulative moisture content variations with an asymptotic behavior towards a limit. For oak and beech, a common compliance can be found for each grain direction.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

The fork device: a test for estimating the memory creep of wood under load during moisture variation

  • 期刊论文

  • 发表日期：

    2025年1月8日

查看全文
  • Antoine Stéphan,
  • Patrick Perré,
  • Clément L’Hostis,
  • Romain Rémond

摘要

When a loaded piece of wood is exposed to variable climatic conditions, the stress state depends on both the stress and moisture content change history due to the memory creep. To explore this complex time-dependent interaction, a new experimental device has been developed. Called the "fork" device, this simple setup allows the evolution of the memory creep of twin wood samples to be determined continuously under different loads. In this work, this device has been used at low temperature (i.e. 30  \(^{\circ }\) ∘ C) and with six different humidity cycles to focus on the mechanosorptive part of the memory creep. The test was performed with thin quartersawn and flatsawn samples of beech and oak originally at green state. periods were chosen to obtain a moisture content quickly close to the equilibrium moisture content for each plateau. With negligible moisture gradient, the dynamics of mechanosorption was measured and compared with moisture variations, species and load direction. The results highlight an increase in mechanosorptive strain with cumulative moisture content variations with an asymptotic behavior towards a limit. For oak and beech, a common compliance can be found for each grain direction.