Scholarlink

<p>Single-point diamond turning (SPDT) is a critical technique in the ultraprecision manufacturing of optical components, offering nanometric surface finishes and submicron form accuracy. However, the influence of material strengthening, particularly through cold working on surface integrity and machining efficiency remains insufficiently understood. This study investigates the effects of feed rate and mechanical conditioning on surface finish and cutting forces during SPDT of an Al–Mg alloy subjected to varying degrees of cold rolling (50% and 90% thickness reduction), compared to the annealed condition. Mechanical properties were characterized through microhardness and elastic recovery measurements, while surface integrity was evaluated using roughness parameters (Rt and Sdq). Cutting forces were recorded in situ to assess energy consumption. The results reveal that increased work hardening leads to higher cutting forces, especially at high feed rates and increased specific cutting energy at low feed conditions. Despite enhanced strength and reduced anisotropy, cold rolling was found to adversely affect surface finish due to intensified tool–material interactions and elastic recovery. These findings highlight the complex interplay between material microstructure and machining parameters in achieving optimal performance in ultraprecision manufacturing diffraction optical elements.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Ultraprecision diamond turning of mechanically modified Al-Mg alloy for diffraction optical elements

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年3月6日

查看全文
  • Danver Messias Bruno,
  • Bab Hamady Ndiass Faye,
  • Renato Goulart Jasinevicius

摘要

Single-point diamond turning (SPDT) is a critical technique in the ultraprecision manufacturing of optical components, offering nanometric surface finishes and submicron form accuracy. However, the influence of material strengthening, particularly through cold working on surface integrity and machining efficiency remains insufficiently understood. This study investigates the effects of feed rate and mechanical conditioning on surface finish and cutting forces during SPDT of an Al–Mg alloy subjected to varying degrees of cold rolling (50% and 90% thickness reduction), compared to the annealed condition. Mechanical properties were characterized through microhardness and elastic recovery measurements, while surface integrity was evaluated using roughness parameters (Rt and Sdq). Cutting forces were recorded in situ to assess energy consumption. The results reveal that increased work hardening leads to higher cutting forces, especially at high feed rates and increased specific cutting energy at low feed conditions. Despite enhanced strength and reduced anisotropy, cold rolling was found to adversely affect surface finish due to intensified tool–material interactions and elastic recovery. These findings highlight the complex interplay between material microstructure and machining parameters in achieving optimal performance in ultraprecision manufacturing diffraction optical elements.