Scholarlink

<p>Titanium alloys exhibit many excellent properties, but they also present challenges such as high cutting forces, elevated cutting temperatures, and severe tool wear. Ultrasonic vibration-assisted milling (UVAM) is an advanced machining technique for titanium alloys that can effectively improve their machinability to a certain extent. This study further investigates the surface integrity of Ti-6Al-4V titanium alloy thin-walled part machined using a combination of minimum quantity lubrication and ultrasonic vibration-assisted milling (MQL-UVAM). The results show that, compared with UVAM, MQL-UVAM machines titanium alloy workpieces with lower surface roughness and more uniform surface textures. Specifically, surface roughness is reduced by 20.98%, residual compressive stress is increased by 9.49%, and machining-induced deformation is decreased by 34.94%. Therefore, compared to UVAM, MQL-UVAM can further enhance the surface integrity of Ti-6Al-4V titanium alloy thin-walled part.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Investigation of surface integrity in ultrasonic vibration-assisted minimum quantity lubrication milling of Ti-6Al-4V thin-walled parts

  • 期刊论文

  • 发表日期：

    2026年2月5日

查看全文
  • Gaofeng Zhang,
  • Huanghui Li,
  • Yang Deng,
  • Tiejun Song,
  • Yu Liao,
  • Shangru Zhou,
  • Jiawei Chen

摘要

Titanium alloys exhibit many excellent properties, but they also present challenges such as high cutting forces, elevated cutting temperatures, and severe tool wear. Ultrasonic vibration-assisted milling (UVAM) is an advanced machining technique for titanium alloys that can effectively improve their machinability to a certain extent. This study further investigates the surface integrity of Ti-6Al-4V titanium alloy thin-walled part machined using a combination of minimum quantity lubrication and ultrasonic vibration-assisted milling (MQL-UVAM). The results show that, compared with UVAM, MQL-UVAM machines titanium alloy workpieces with lower surface roughness and more uniform surface textures. Specifically, surface roughness is reduced by 20.98%, residual compressive stress is increased by 9.49%, and machining-induced deformation is decreased by 34.94%. Therefore, compared to UVAM, MQL-UVAM can further enhance the surface integrity of Ti-6Al-4V titanium alloy thin-walled part.