Scholarlink

<p>Fabrication of super finished surfaces is a challenging and expensive technology. The present study reveals a cost-effective methodology of producing mirror finish on difficult-to-machine lead-free brass by ultra-precision diamond turning. Ultra-precision face-turning has been performed in an economically developed machine tool comprised of a ceramic bearing spindle. A mirror surface finish has been achieved on the workpiece with average surface roughness from 7 to 51 nm. The axial spindle drift was small; however, a marginal spindle drift has induced small amplitude periodic fluctuation of surface profile and center groove on the machined surface. Additionally, the amplitude of machine tool vibration has appeared in the nanometer level. Negligible tool wear has been observed as well. Moreover, the ultra-precision machining performed in the present study was economically and environmentally sustainable.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Feasibility of cost-effective ultra-precision diamond turning using ceramic bearing spindle

  • 期刊论文

  • 发表日期：

    2025年2月18日

查看全文
  • Arnab Das,
  • Chitransh Singh,
  • Vivek Bajpai,
  • Madan Lal Chandravanshi

摘要

Fabrication of super finished surfaces is a challenging and expensive technology. The present study reveals a cost-effective methodology of producing mirror finish on difficult-to-machine lead-free brass by ultra-precision diamond turning. Ultra-precision face-turning has been performed in an economically developed machine tool comprised of a ceramic bearing spindle. A mirror surface finish has been achieved on the workpiece with average surface roughness from 7 to 51 nm. The axial spindle drift was small; however, a marginal spindle drift has induced small amplitude periodic fluctuation of surface profile and center groove on the machined surface. Additionally, the amplitude of machine tool vibration has appeared in the nanometer level. Negligible tool wear has been observed as well. Moreover, the ultra-precision machining performed in the present study was economically and environmentally sustainable.