Scholarlink

<p>Traditionally, there are two types of wood fiber insulation boards (WFIB), the rigid ones produced in the industry by a continuous steam process, bonded with polymer diphenylmethane diisocyanate (pMDI), with densities between 80 and 200 kg/m<sup>3</sup>, and the flexible ones with densities under 80 kg/m<sup>3</sup> produced by hot air, usually with bicomponent fibers as a binder. In this work, wood fiber insulation boards (WFIB) were produced with polylactic acid (PLA) as a binder by hot press (HP) and hot air (HA). WFIB with densities of 60 kg/m<sup>3</sup>, 80 kg/m<sup>3</sup>, 100 kg/m<sup>3</sup> and 5%, 10% and 15% of PLA percentage were produced by hot press (HP) and hot air (HA). Wood and PLA fibers were examined by scanning electronic microscope (SEM) and optical microscope. The WFIB were assessed for physical properties as density and short-term water absorption as well as for their resistance to compression as a mechanical property. Thermal properties such as thermal conductivity and thermogravimetric analysis (TGA) were also tested. In the produced WFIB, the values of density follow the same pattern as water absorption, compression strength, and thermal conductivity. The polylactic acid (PLA) content improves mechanical value like compression and diminishes physical value such as short-term water absorption in WFIB. In conclusion, wood fiber insulation boards (WFIB) were successfully produced with polylactic acid (PLA) as a binder, by hot press (HP) and hot air (HA), reaching remarkably lower thermal conductivity values, comparable with commercial ones.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Wood-fiber insulation boards produced with polylactic acid as a binder by hot press and hot air

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年1月2日

查看全文
  • Aldo Joao Cárdenas-Oscanoa,
  • Lawrence Tene Tayo,
  • Caoxing Huang,
  • Chen Huang,
  • Darshan Shivappa Nayaka,
  • Markus Euring

摘要

Traditionally, there are two types of wood fiber insulation boards (WFIB), the rigid ones produced in the industry by a continuous steam process, bonded with polymer diphenylmethane diisocyanate (pMDI), with densities between 80 and 200 kg/m3, and the flexible ones with densities under 80 kg/m3 produced by hot air, usually with bicomponent fibers as a binder. In this work, wood fiber insulation boards (WFIB) were produced with polylactic acid (PLA) as a binder by hot press (HP) and hot air (HA). WFIB with densities of 60 kg/m3, 80 kg/m3, 100 kg/m3 and 5%, 10% and 15% of PLA percentage were produced by hot press (HP) and hot air (HA). Wood and PLA fibers were examined by scanning electronic microscope (SEM) and optical microscope. The WFIB were assessed for physical properties as density and short-term water absorption as well as for their resistance to compression as a mechanical property. Thermal properties such as thermal conductivity and thermogravimetric analysis (TGA) were also tested. In the produced WFIB, the values of density follow the same pattern as water absorption, compression strength, and thermal conductivity. The polylactic acid (PLA) content improves mechanical value like compression and diminishes physical value such as short-term water absorption in WFIB. In conclusion, wood fiber insulation boards (WFIB) were successfully produced with polylactic acid (PLA) as a binder, by hot press (HP) and hot air (HA), reaching remarkably lower thermal conductivity values, comparable with commercial ones.