Scholarlink

Introduction <p>The iTero Element (Align Technologies, San Jose, CA, USA) is a&#xa0;widely used intraoral scanning device, and its protective sleeves for the scanning head are provided for single use. This condition puts the clinical management budget under financial strain and creates a&#xa0;disadvantage for managing environmental waste. The objective of our research was to assess how repeated sterilization of disposable scan head covers with hydrogen peroxide affected the precision of digital impressions.</p> Methods <p>Intraoral scans were carried out using the iTero Element 5D scanner on 26&#xa0;patients. Hydrogen peroxide was used to sterilize the sleeves for 45 min at 45 °C. The sterilization procedure was repeated between the second, third, and fourth intraoral scans. Each tooth was given a&#xa0;score based on the color change between the first and fourth scans, which were superimposed using the iTero TimeLapse technology. The OrthoCAD® software (Align Technologies) was also used to measure the intercanine, interpremolar, and intermolar distances, as well as the mesiodistal dimensions of all the teeth between the first molars.</p> Results <p>No statistically significant difference was found between the mesiodistal dimensions of the teeth and the intercanine, interpremolar, and intermolar distances between the 1st and 4th scans. There was no correlation between the mean differences of the mesiodistal dimensions of the teeth obtained with the 1st and 4th scans and TimeLapse scores.</p> Conclusion <p>After sterilization with hydrogen peroxide, the repeatability of digital measurements of the protective sleeves of the intraoral scanner was not adversely affected, and their clinical performance was maintained.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Impression precision after hydrogen peroxide sterilization of scanner sleeves

  • 期刊论文

  • 发表日期：

    2026年4月20日

查看全文
  • Berza YILMAZ,
  • Meric ARSLAN,
  • Damla Nur KAYASAROGLU,
  • Elif Dilara ARSLAN,
  • Ezgi SUNAL AKTÜRK

摘要

Introduction

The iTero Element (Align Technologies, San Jose, CA, USA) is a widely used intraoral scanning device, and its protective sleeves for the scanning head are provided for single use. This condition puts the clinical management budget under financial strain and creates a disadvantage for managing environmental waste. The objective of our research was to assess how repeated sterilization of disposable scan head covers with hydrogen peroxide affected the precision of digital impressions.

Methods

Intraoral scans were carried out using the iTero Element 5D scanner on 26 patients. Hydrogen peroxide was used to sterilize the sleeves for 45 min at 45 °C. The sterilization procedure was repeated between the second, third, and fourth intraoral scans. Each tooth was given a score based on the color change between the first and fourth scans, which were superimposed using the iTero TimeLapse technology. The OrthoCAD® software (Align Technologies) was also used to measure the intercanine, interpremolar, and intermolar distances, as well as the mesiodistal dimensions of all the teeth between the first molars.

Results

No statistically significant difference was found between the mesiodistal dimensions of the teeth and the intercanine, interpremolar, and intermolar distances between the 1st and 4th scans. There was no correlation between the mean differences of the mesiodistal dimensions of the teeth obtained with the 1st and 4th scans and TimeLapse scores.

Conclusion

After sterilization with hydrogen peroxide, the repeatability of digital measurements of the protective sleeves of the intraoral scanner was not adversely affected, and their clinical performance was maintained.